---
title: "Driving Test Locations"
slug: "driving-test-locations"
updated: 2026-08-26T07:08:54Z
published: 2026-08-26T07:08:54Z
canonical: "support.bookingtimes.com/driving-test-locations"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.bookingtimes.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Driving test locations

This feature is available on these plans ([view pricing](https://bookingtimes.com/prices))

	
		
			 **Kick Starter**
		
			 **Nail & Scale**

For organizations such as Driving Schools who may have bookings at a specific venue, i.e. a Test Centre, BookingTimes allows you to add a list of these which can be chosen from when making a booking (and also includes adding the Test Time). This article will cover how to enable them on a Service first, and how to then add and remove Test Locations

> [!NOTE]
> Admin bookings only
> 
> Please note these options will only appear for admin bookings only, they will **not** appear publicly.

## Enabling test locations and times on a service

### Steps

1. Navigate to **Setup** > **Bookings** > **Services**
2. Click the relevant Service > **Options** Tab
3. Under ***Show test Location***, check **Allows a test location to be selected on the Booking**. You can check to **Show Test Time**
4. Click **Save** ![](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image-2ZZ9Y6NK.png)
5. Once this is set (and you have added Test Locations as per the section below), you as an admin can add the Test Location (and Time) as follows.

![](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image-BRJ0WXIE.png)

---

## Adding test locations

Ensure that you have enabled the test location/time on a service first as per the above section. After that’s done you will then be able to add test locations.

### Steps

1. Navigate to **Setup** > **Bookings** > **Locations**
2. Select the relevant Location/region your test centre(s) will be in

![image.png](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image%28238%29.png)

1. Click the **Test Locations** tab
  1. If this tab isn’t visible, ensure that you have enabled the test location/time on a service first as per the above section.

![image.png](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image%28237%29.png)

1. Click **Add Test Location**
2. Enter the Test Location name
3. Click **Save**

---

## Removing test locations

### Steps

1. Navigate to **Setup** > **Bookings** > **Locations**
2. Select the relevation location/region your test centre is in ![image.png](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image%28238%29.png)
3. Click the **Test Locations** Tab ![image.png](https://cdn.document360.io/6926c75e-9b20-4216-bf9f-d7ca1df9c74f/Images/Documentation/image%28237%29.png)
4. Click the relevant Test Centre
5. Click "**Remove Test Location**"